Banners We can produce banners in all sizes and colours including full colour prints using artwork supplied by the customer or designed by us, There are different weights of banner material the lightest usually being the cheapest and more often used for one off promotions although for larger banners it is recommended that the heavier better quality materials are used.
All banners come with eyelets all round unless stated otherwise, for instance If it is to be used on scaffolding poles or hung etc. There are various ways of fixing banners, they can be fixed to posts vertically or horizontally, to slide on a channel on a wall (to be removed and re-fitted like a curtain), or on a lightweight aluminium frame. The aluminium frames are compact when stored in there bag with the parts being no more than 1600mm at there longest, they come with bungees and ground pegs. They can be double sided, extended, and have different leg heights.

 

Roll ups or Pop-Up Banners are becoming ever more popular as they are an effective easy to use and carry, way of displaying you message. The Standard Roll-up is available in 850 to 1000 mm wide and 2000mm in length, if has an aluminium base with twist out feet, there is a fold way pole with spotlight fitting and a practical padded bag that everything fits into for easy transportation.
Roll Up Banners


The Luxury Roll-up as with the Standard will take paper and PVC graphics, comes with a carry bag, but has the added advantage of three graphic sizes 850-1000-1200mm, has a telescopic pole 1600-2200mm with spot light fitting and snap fittings top and bottom so the graphics can be changed (no need to buy a new cassette), There is also available a powerful 50 watt Spotlight, BS certified that fits over the top of the roll-ups.

Post Mounted and Projecting Banners are also available and come in many forms. We can supply Projecting wall Mounted kits, there is the Standard which consists of two heavy duty 27mm diameter. poles with 75mm back plate all fixings and fittings. The Self Tensioning System which is similar to the Standard but with stainless steel 12mm rods, Galvanised tensioning hooks and heavy gauged springs. Also available is a Single Wire Support Kit which is anchored to the wall and the end of the bottom pole.

The Post Mounted Kit is as above but comes with special back plates to wrap around the posts. These can be fitted in pairs and have a maximum width of 915mm. The Centrally Mounted Wall & Post Kit these are set onto 38mm diameter. White powder coated poles top and bottom that are self adjusting. They can be upto 1220mm wide with a 4 metre drop and 610mm wide with a 5 metre drop and can be used back to back and are east to install

 

Flag Poles Because there is more demand for the Temporary and Fixed type flag poles, we now cover a larger range to give our customers a wider choice to help get the right pole and flag of the right job.

Here are some of the flags we have to offer:

The Eventapole (a freestanding telescopic pole max. Height 5.4m min 2.8m, weighted bottom, fold away, 360' rotating head ,Max flag 1000 x 3000mm).

The Masterful (a forecourt telescopic pole max Height 5.5m min 2.2m, weighted bottom, fold away, 360' rotating head ,Max flag 1200 x 3000mm).

The Showhome (a building development type flagpole 6.5m white powder coated, toggle and rope or 360' rotating arm, Max flag 1000 x 3000mm).

Quiverquill made from Aluminium, GRP, and plastic, sizes 2820 x 870mm or 3870 x 1000mm portrait. Digitally printed single sided, mirror image flag, Telescopic shaft either 3900mm or 4900mm in max height, Heavy metal base with spigot and peg holes pegs included.

Quiverwing made as the Quiverquill, Sizes 2050 x 1250mm or 2930 x 1500mm.